GLD Products
Viper 800 Dartboard
Item 42-1034
1-800-225-7593
www.gldproducts.com
9
POWER INSTALLATION
The dartboard is designed to be powered by an AC to 5V DC, 1000 milliamp (minimum) adapter, with
the DC plug polarity con! gured as positive (+) outside, and negative (-) inside. To connect the adapter,
plug the DC plug into the DC power jack on the dartboard and the AC plug into an electrical outlet.
1.
The board is not intended for children under the age of 12 years old.
2.
The board must only be used with the recommended transformer.
3.
The transformer is not a toy.
4.
Disconnect the dartboard from the transformer before cleaning.
PROTECTIVE FILM
This electronic dartboard has a clear protective ! lm over the entire display and button area to prevent
scratching during shipping. It is recommended that you remove this ! lm for easier reading of the display.
To remove, simply lift edge, peel off and discard.
WARNING:
Not for use by children without adult supervision. Darts are not
toys and may cause injury if used improperly. Everyone must
stand behind the dart thrower.
Содержание VIPER 800
Страница 52: ...This page left intentionally blank ...