GLD Products
Tucson MMXI Billiard Table
Item 64-0146
8
1-800-225-7593
www.gldproducts.com
6. The leg end panel (#5) should slide into the channels on the legs. It may be helpful to
stand the leg assembly up as shown. This will help prevent the leg assembly from
becoming angled and preventing the leg end panel from sliding into place. The side of
the leg end panel that is visually better should be to the outside of the curve.
7. When the leg end panel (#5) is in place tighten all eight support bolts (#6) using the allen
wrench (#18).
8. Repeat for the second leg assembly