GLD Products 64-0907, Руководство по замене запасных частей

Страница: 8 / 16

GLD Products Maverick Foosball Table
Item 64-0907
1-800-225-7593 8
www.gldproducts.com
STEP 2 - TURN BASE OVER
The base assembly is ready to be turned over.
USE AT LEAST TWO PEOPLE TO LIFT THE BASE ASSEMBLY AND TURN IT OVER TO
REST ON THE LEGS.
DO NOT ROLL THE TABLE OVER. This will place a sideways force on the legs. The legs
should be off the floor until the base assembly is rotated completely. Set the base assembly
down.
If visually the leg positions need adjusting, loosen the bolts, adjust, and retighten.
STEP 3 - ATTACH PLAYERS
1. Identify the position of the player rods by the number of holes in the rod. The top view will
help to locate correct positions.
2. Assemble the handles (#15) to the player rods. Find the end of the player rod that has a
hole approx. 6 inches from the end. Stand the rod up and place the handle (#15) over the
end. Use a mallet to hammer the handle onto the rod.
3. Insert the end of the player rod (#7, #8 or #9) into the correct bushing on the side of the
table.
NOTE: The handles for each color team will be on the same side.
4. Slide a bumper (#12) followed by a washer (#13) onto the rod.
5. Select the players (#10 or #11) onto the rod. The “feet” may not have the same shape on
both sides. All players should face the opponents goal.
6. After the last player is on the rod, place a plastic washer (#13) then a bumper (#12) onto
the rod. Push the end of the rod into the second bushing.
NOTE: The player rod should spin freely even though the players are not secured in place.
7. Secure the players (#10 or #11) to the player rod using a bolt (#5) and a lock nut (#6).
Tighten to keep the players from moving.
8. On the end of the player rod away from the handle, push an end cap (#14) over the rod.
9. Repeat for the remaining player rods. Pay attention to team colors and foot direction.
DO THIS
NOT THIS