GLD Products
Kansas Billiard Table
Item 64-0147
7
1-800-225-7593
www.gldproducts.com
Tools Required
•
Allen wrench (#16) - Included with table
•
Phillips screwdriver (not included)
•
Level (not included)
•
Electric screwdriver may be helpful. CAUTION: You must set at
LOW TORQUE and use extreme caution because you could
overtighten the hardware, strip the screws, or damage the table.
•
Rubber mallet or hammer (not included)
Assembly Tips
Make sure you understand the following before you begin to assemble your billiard table.
1. READ THIS MANUAL all the way through before beginning assembly.
2. When installing parts that have more than one bolt, start ALL bolts in that part by hand
before tightening anything.
3. Some drawings or images in this manual may not look exactly like your product.
4. You will need a second adult to assist with this assembly.
Note:
Save all packing materials until the parts have been inspected and the table is
assembled.
Unpack the Pieces
•
Lay the box on a flat surface (floor). You may want this near your
area of assembly.
•
Unpack the boxes and part bags. Inspect and count the parts. The
Parts Identifier page can be used to record your results.
•
If any parts are damaged or missing contact GLD customer service.
•
Missing fasteners may be purchased at a hardware store using the
descriptions on the Parts Identifier page(s).
