203-INST-UK-001 v1.0
–
02 Aug 2022
Need assistance? +44 (0)1379 658300 [email protected]
Page 9 of 21
Installation Procedure
For this guide, the details are for installation of the Pitchridge on to a warm roof. This has tiles at 120mm pitch. Other installations
differ superficially, but the installation process is similar. All the images in this guide are generic representation, they should be used
as a reference only and may not be a true representation of your installation. Please refer to Glazing Vision’s sales drawing
s
throughout the installation.
Glazing Vision advises to do a dry run prior to full installation to ensure openings are correct.
Figure 2
–
Example of Warm-roof installation (duplication of figure 1)
Ensure that you have read and understood the entire installation instructions section before starting.
The surrounding roof should not yet be felted or battened; this will be covered in the installation instructions.
Prior to commencing installation, photographs of the fully weathered structural opening and surrounding area must
be taken and retained for future reference.
