7
to select mid heat power mode. The mid heat power icon are on, which
indicates that the heater is operating in mid heat gear; press the Power key
again to select high heat power mode. The high heat power icon and icon
are on, continuous press the power button can be in the low, mid-range and
high-grade switch between power.
•
Press the timer key, and the number on the right side of the timer indicator
icon will glitter. Then press the “+” key or “-” key to select timing range (1
to 24 hours). After the number glitters for 5 times, the remaining time for this
timer will be displayed and the indicator icon
°C
will glitter (timer state).
•
Press the temperature key again, and the number on the right side of the
temperature indicator icon will glitter. Then press the “+” key or “-” key to se-
lect temperature range (15℃—35℃). After the temperature value is selected and
the number glitters for five times, the heater will enter default (indoor tempe-
rature) state. (Note: If the pre-set temperature is lower than the ambient tem-
perature, the will stop working.)
•
Power-off: Press the (ON/OFF) key, LED display of icon , will be off. But
temperature indicator icon
°C
and characters are still lit. The heater stops
working.
Technical Data:
Type
Voltage
Frequency
Power
Category
Vesubio
230V
50/60Hz
2000W-2500W
I
Vesubio i
230V
50/60Hz
2000W-2500W
I
The product is for household use only.
Correct Disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent pos-
sible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, plea-
se use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for
environmental safe recycling.
