Glatz AMBIENTE, Руководство по обслуживанию

Страница: 6 / 15

Sunshade
Ambiente
G
latz AG 2011_Servicemanual Ambiente_en 6
Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc
Created: Dino Aeschbacher/29.09.2010
Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010
•
Replacement of the rod
Release the screws on the upper side of the crown until you are able to pull
out the rod.
Hang up the new rod into the crown and tight the screws.
•
there is the same procedure with the slide
2. Mounting of a new cover
•
Put new cover over the framework in reverse order, hang the shade part
on the carrying arm and slightly fasten with the screws for the purposes of
adjustment.
•
Pull cable wire through the slide and lift the slide slightly. Tighten (lock)
nuts with washer. Attach the lid to the slide.
•
Fasten Velcro strips on each rod and screw in the screws on the rod
extensions. The tension must be considered (attach cable straps on the
corner rods).
•
Line up the shade part and pull tight the screws at the top of the carrying
arm.