4.
NEW SIGN KIT INSTALLATION
IMPORTANT NOTE:
PLEASE ENSURE THAT ALL RELEVANT PERSONNEL READ THE POINTS LISTED WITHIN THIS LEAFLET AND
THAT A COPY IS GIVEN TO STAFF INVOLVED WITH THE INSTALLATION AND MAINTENANCE OF THIS PRODUCT.
SAFETY NOTE:
PLEASE REFER TO ‘THE MANUAL HANDLING OPERATIONS REGULATIONS 1992’ DURING HANDLING.
5.
Insert the M8 Hex Bolts through the Orbis fixing
holes.
Should you require any further assistance please contact us on
tel: 01253 600410, fax: 01253 792558 or email: [email protected]
.
Issue 3 - 06 Nov 2017 - Stock No. C000/0499 - DWG No. 07B324-111
AND ORBIS SIGN KIT ARE TRADEMARKS OR REGISTERED TRADEMARKS OF GLASDON GROUP OR
ITS SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES
A planned maintenance schedule or regular inspection is
recommended, replacing components as necessary.
Replacement components are available direct from GLASDON.
GLASDON cannot be held responsible for claims arising from incorrect
installation, unauthorised modifications or misuse of the product.
© Copyright JULY 2017
Glasdon UK Ltd reserve the right to alter specifications without prior notice.
Secure in position with M8 Washers and Nuts
using 13mm Spanners.
10.
9.
Locate second Orbis onto the exposed fixing
bolts, which will hold all the units together.
6.
Align the 2 Point Bracket with the fixing holes
on the Orbis Post.
7.
Then align the Sign Carrier fixing holes with
the 2 Point Bracket and the Orbis Post.
8.
Locate Orbis with fixing bolts in to the 2 Point
Bracket, Orbis Post and Sign Carrier.