![background image](http://html.mh-extra.com/html/glasdon/beacon/beacon_operating-and-maintenance-manual_2230702008.webp)
8
GENESIS BASE FIXING DETAIL
(SCALE 1:2)
Sleeve type M8 heavy duty high
load BZP anchor bolt Gr 8.8 size
12/10 - anchor length 80mm
122
28
C
L
galvanised mild
steel subframe
100 x 5mm welded
base
!"#$%
plate
Flat, level concrete
base (by others)
18mm Anti-slip plywood
GRP wall panel with
!&'
retardent foam and resin
chipboard reinforcement
Genesis
Base Requirements
The minimum base size required is 100mm less than the overall building size. Assuming no suitable existing
surface, the base should be a minimum of 125mm concrete on to well consolidated hardcore.
The concrete should be of minimum C20/25 grade in accordance with BS8500 Concrete: The Complementary
British Standard to BS EN 206-1.
The base should be flat, level and square, and preferably be raised slightly above the surrounding ground
level.
Base Fixing Detail
Base Fixing
Base fixing is recommended for all installations, permanent and non-permanent.
Base fixing (by our customers) is accomplished using the expanding anchor bolts supplied. Refer to the base
fixing instructions supplied with the fixings for correct installation in accordance with the manufacturer’s
recommendations.