21
GB
20°C
20°C
x2
Temperature override
If you select another temperature
during either a comfort or a cutback
period, and do not save (by pressing
for five seconds), the new temperature
will apply only to the current period.
To select a new cutback temperature setting
While cutback temperature is ongo-
ing, choose the desired new cutback
temperature by pressing or . Save
the setting by pressing more than
five seconds.
Permanently delete cutback function
To permanently delete a temperature
cutback function, press or until
the green lamp goes out.
Child lock
To lock: Press and at the same
time until you see - - in the display.
To unlock: Press and at the same
time until you see - - disappear in the
display.
Calibration
Should the actual room temperature
and the H30’s setting not correspond,
the H30 should be calibrated.
First let the heater work at the same
temperature setting, preferably for
at least 24 hours, keeping doors and
windows closed. This makes certain
that the H30 that is controlling room
temperature.
Hold down on and press once on
Release . ºC will flash 3 times and
the setpoint temperature will flash.
Press or until the display shows
the same as the actual measured room
temperature. Store by pressing for
5 seconds.
The heater will now work with the
temperature displayed by the H30 and
after a period this will correspond
with the actual temperature of the
room. This procedure can be repeated
at a later date to ensure correct
calibration.
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any flashing
mode.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the key and then switch the
heater ON.
Hold the key in for more than 5
seconds until rE starts flashing in the
display.
Release and HO (Home Mode) will
flash.
You can select between modes HO, OF
(Office) and CA (Cabin) by pressing
the or keys.
Confirm your choice by pressing the
key for more than 5 seconds.
22 (°C) will flash. Select your pre-
ferred comfort temperature.
Confirm by pressing in the key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
Change the duration of temperature cutback
and/or the cutback temperature
Hold down on and press twice on
or . Release F and h (hours) will
flash 3 times.
Using the or key select the
number of hours you want the cutback
to last.
Confirm by pressing key briefly.
°C will flash 3 times and then the cur-
rent cutback temperature will flash.
With or key select the cutback
temperature.
Confirm by pressing key briefly.
d (day) will be displayed for three
seconds, and afterwards a random
number.
Using the and keys, select the
correct weekday (Monday = 1 etc.).
Press briefly to confirm.
