9
INSTRUCTION FOR REMOTE CONTROLLER AND SWITCH PANEL
1)
TEMPERATURE SETTING
2)
TIMER SETTING
3)
TOP LIGHT SETTING
4)
POWER ON/OFF
5)
HEAT SETTING
6)
FLAME SETTING
1
4
2
5
3
6
CONTROL PANEL / REMOTE CONTROL OPERATION
(Control panel POWER switch must be ON to use remote control.)
The touch display panel is shown by LED’s on the front bottom right of the appliance.
The LED’s will appear on the bottom of the fireplace control panel.
Turns the appliance ON/OFF.
Controls Flame colors.
3 Settings: (L1 yellow - L2 blue - L3 purple-cycle)
Controls Top light colors.
3 colors: (F0 OFF - F1 yellow - F2 blue - F3 purple-cycle)
Controls the Heater.
Press button to initiate the heater.
(OFF) no heater or blower.
(LO), heater blows warm air (750W)
(HI), heater blows hot air (1500W)
NOTE: Heater functions cycle from OFF-LO-HI
1) Press once: Control panel indicator
becomes active.
2) Press again until desired setting is
reached. Digital display shows setting
circles as below.
NOTE: Press the button for 15 seconds, the temperature setting will switch
from °C to °F. Same way from °F to °C.
Controls the Timer.
9 Settings: (1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h,9h) Press button until reach desired setting.
POWER
FLAME
TOP LIGHT
HEATER
TIMER
TEMPERATURE
Display Value
Temperature
1
22
71
2
24
75
3
26
78
4
28
82
5
30
86
6
37
99
°C
°F
Do not move or remove the mesh trim panel, when the appliance is plugged in and operating.
This will cause the remote control and touch panel to no longer function.
WARNING
