GlammFire.
PAG./21
6.4—Turn on
After selecting the power supply source, the system turns on, appearing immediately the fol-
lowing information on the display:
1.
“Start”
2. “Bt □” - Battery charge status
3. “Et □” - Bioethanol level
Next, click on the
"ON"
button on the display / remote control for 2 seconds.
However, in case there is the information "Please Close Door", you should close the door of
the tank zone. After the door closed, the following information appears on the display:
4.
“Checking Tank”
5.
“Tank Ok”
At a later time, the system emits one beep, signalling that the tank door is locked, and the sys-
tem is ready to start lighting.
6.
“Ref. Ramp”
7.
“Ignition”
8.
“Maximum” / “Minimum” - combustion level
The Crea7ionEVO PLUS is always working at the maximum position. If you want that it works
at the minimum level, you must click on the "-" button on the remote control or, at the same
time, the position
"I"
+
"O"
on the display.
6.3—Remote Control synchronization
The synchronization of the remote control can only be achieved with the
“ON/OFF/ ON”
button in the
"OFF"
position.
Pressing the ON button (
"I"
) on the display, choose the power supply on the
"ON/ OFF/ ON"
button.
Then, releasing the power button (
"I"
) of the display, click on the OFF button (
"O"
) on the remote con-
trol, before the expiration time indicated on the display.
At this time, the remote control is already synchronized with the Crea7ionEVO PLUS and ready to use.
Содержание Apollo EVO Plus
Страница 1: ...INSTRUCTIONS MANUAL Crea7ionEVO PLUS WALL MOUNTED FIREPLACES ...
Страница 2: ...GlammFire PAG 2 ...
