Installation Instruction
GCB800/1200
(GCBX5-FHC-N3R4-M/GCBX5-FHC-N4X-M)
3. How to couple Plate Flange Ass’y and Cable cylinder
Install Bracket in the front part of Plate Flange Ass’y as
ⓐ
with M5X10(2ea), insert Cable cylinder to Bracket and attach it loosely as
ⓑ
.
Rotate the Cylinder Screw along the Lever’s M6 Tap until 2~3 lines sticks out as
ⓒ
.
4. How to connect Plate Flange Ass’y and Handle to Enclosure
Place Rubber Ring in the slot of Handle Ass’y. Adhere it to Enclosure’s upper part.
Place Plate Flange Ass’y in the slot and attach M6X18 loosely as
ⓐ
.
Tighten M6X18 loosely
ⓑ
in the lower side. Find the balance of Handle Ass’y moving it up-down, right-left, then as
ⓒ
, tighten Screw from the
upper side with the one from the lower side.
5. How to Connect Handle Lever and Lever of Plate Flange Ass’y
Move Handle in ON-OFF direction, and insert Pin into Link Hole of Handle and into Lever Hole of Plate Ass’y as
ⓐ
. Use M5X10 Screw to fix Pin.
- 3 -
M6X18, Screw
Rubber Ring
M5X10, Screw
