Gladen SPL 3000c1, Руководство пользователя

Страница: 6 / 8

Protect
INPUT
A B
Max 60Hz 12dB 90Hz 250Hz 180 Min 10Hz 0dB 30Hz 30Hz 0
SLAVE
SPEAKER OUTPUT
Power
REMOTE
BOOST FREQ. LPF PHASE SUBSONIC GAIN
BASS
MASTER
MASTER
OUTPUT
SLAVE
INPUT
-6-
SPL 3000c1
SPEAKER CONNECTION
Using a dual amplifier configuration, the MASTER amplifier has total control over the SLAVE
amplifier. The positive terminal of the subwoofer's voice coil must be connected to the positive
terminal of the MASTER Amplifier and the negative terminal of the subwoofer'sm voice coil must
be connected to positive terminal of the SLAVE Amplifier. Since the dual amplifier configuration
has tremendous output potential, please ensure that your subwoofers can handle such a large
amount of power.
When utilizing the dual amplifier configuration, it is important to note that the connected
speakers' load cannot be lower than 2 ohms. Connecting a lower impedance load can
damage the amplifier and void your warranty.
Use 8 Gauge(AWG)
wire cable
2~8 ohms
Caution
"MASTER UNIT"
"SLAVE UNIT"
+
-
Protect
INPUT
A B
Max 60Hz 12dB 90Hz 250Hz 180 Min 10Hz 0dB 30Hz 30Hz 0 SLAVE
SPEAKER OUTPUT
Power
REMOTE
BOOST FREQ. LPF PHASE SUBSONIC GAIN
BASS
MASTER
MASTER
OUTPUT
SLAVE
INPUT
Dual amp speaker connection