5
26. If removed, install engine lifting bracket (1) and bolt.
Torque nut to 77 N·m (56 ft.
lbs).
27. Connect the plenum air temperature sensors electrical connector.
28. Using the supplied gasket install the intake manifold.
29. Install oil dipstick tube support at fuel filter housing (if removed).
30. Install the engine oil dipstick tube and mounting bolt.
31. Position the charge air cooler outlet tube onto the air inlet housing. Tighten the
clamps to
100 in. lbs.
torque.
32. Attach the engine wire harness to the air inlet housing.
33. Connect the battery negative cables.
34. Prime the fuel system. Start vehicle and check for leaks.
Installation complete! Enjoy the new power and lower EGT’s of the Air-Boss 67 high rise
intake plenum!!!
Glacier Diesel Power, Inc.
glacierdieselpower.com
509-993-4923
