9
Installation (continued)
11
Installation using the battery
pack
□
There are 2 options to secure the battery pack (P) under the counter: Tape Installation or Screw Installation.
□
Screw Installation: Drill holes in the wall using a 6mm (15/64”) diamater drill bit. Install the battery pack
seat (1) using the molly anchors (3) and screws (4) provided.
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
□
Tape Installation: Attach one side of the double sided tape (2) to the battery pack seat (1). Firmly attach the
battery pack seat (1) to the cabinet wall. Place the battery pack (P) into the battery pack seat (1).
NOTE:
This step is for battery installation (optional). If the
battery will not be used, install as described in step 12. Before
installation, select the location for the battery pack (P) and
verify that the battery pack wire will reach the connection on
the bottom of the control box (O).
□
Insert the battery pack cable (5) into the control box connection (6). Ensure the arrows on the data cable (7)
and the control box connection (8) are aligned to one another to ensure proper installation.
Screw Installation
1
(15/16") dia.
P
1
4
3
6mm
2
1
6
5
O
8
7
Tape Installation
2
1
1
P
1
1
2
3
OR
CAUTION:
If the connections are not made properly, the
sensor feature will not work.
