4
Installation
1
2a
2b
Preparing for installation
2
Installing the faucet assembly
□
Install the faucet body (A)-including supply
hoses and sensor cable (1)-through the hole
in the sink.
CAUTION:
Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE:
This step is for no escutcheon installation (optional).
□
Place the escutcheon (C) and gasket (D) on the
holes in the sink.
NOTE:
This step is for escutcheon installation (optional).
□
Install the faucet body (A)-including supply
hoses and sensor cable (1)-through the hole
in the escutcheon (C).
□
Shut off the water supply. Remove the old
faucet. Clean the mounting surface.
□
Before installation, remove the quick connector (G)
from the free end of the hose by unscrewing it in
a counterclockwise direction.
G
A
1
A
C
D
1
