6
Installation (continued)
5
Installing the weight
□
Insert the weight (F) onto the clip (G) by sliding
it down onto the clip (G).
□
Install the weight clip (G) at the point of the
hose marking “weight here”.
6
Making the water supply
connections
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
NOTE:
The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
2
1
Weight
here
Weight
here
G
G
F
F
