Installation
4
1
Installing the faucet assembly
CAUTION:
Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Before installation, drill three holes on the wall.
The valve access hole should be 1-1/2 in. to
1-3/4 in. diameter. The recommended valve depth
to the finished wall min. 2 in. to max 3-1/2 in..
2
Securing the valve body
□
Secure the valve body (H) with the screws (I).
Use a Phillips screwdriver to tighten the screws (I).
2 in. to 3-1/2 in.
3* 1-1/2 in. to
1-3/4 in. dia.
Finished wall
8 in.
10-3/5 in.
1-3/5 in.
2-8/25 in.
H
I