5
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
3
4
Drilling the holes & Making the
waterline connections
NOTE:
Do not reverse the hot and cold supply.
□
Mark the locations for the screws with a pencil
(1). With an electric drill (2), drill three 1/4 in.
diameter holes for the screws in the floor.
Place the anchors (G) into the holes.
□
Connect the flexible supply lines (3) to the water
supplies (4).
Screwing the mixer to the
standpipe
□
Screw the standpipe (D) onto the mixer (C) by
hand. Turn in a clockwise direction until it is
tight.
Cold inlet
supply line
Hot inlet
supply line
Front
C
D
6mm dia.
Floor
Floor
2
G
1
3
3
4
4
