Installation
4
1
Installing the faucet assembly
CAUTION:
Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Place the faucet (A) through the mounting holes
in the sink until the faucet (A) sets on top of the
sink.
□
Secure the faucet (A) to the sink using the
washer (C) and lock nut (D) provided.
NOTE:
Ensure the washer (C) and hoses (1) are no
interference.
□
Clean the mounting surface.
□
Remove the preassembled lock nut (D) and
washer (C) from the new faucet (A).
□
Before installation, ensure that the flange (B) is
placed on the bottom of the new faucet (A).
1
A
B
C
D
2
Preparing the pop-up drain
□
Remove the old pop-up drain and clear up the
hole in preparation for the new pop-up drain
installation.
□
Unscrew the nut (J) from the pop-up body (E),
move over the tail pipe (K) and washer (I), then
unscrew the coupling nut (H) and remove the
washer (G).
E
G
J
K
H
I