Installation (continued)
10
Adjusting the temperature
13
D
Reinstalling the inverter and
sleeve
□
Place the inverter (2) onto the valve body (D)
and rotate the inverter (2) with notch facing
down. Then secure with the screw (3).
□
Screw the sleeve (4) onto the valve body (D).
NOTE:
Rotate the cartridge stem (1) clockwise to turn off
the water before you install the handle.
11
Installing the escutcheon
and handle
□
Install the escutcheon (E) onto the valve body
(D) using the escutcheon screws (M).
Place the accessorize cap (S) onto the
escutcheon (E).
□
Place the handle (F) onto the valve body (D) and
tighten the set screw (G) with the Hex wrench
(Hex: 2.5 mm, H) provided.
□
D
2
4
3
1
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
D
F
M
E
G
H
S
