GL GLF-1, Инструкция по сборке

Страница: 28 / 28

Basic setup tips before 1
st
run
1, Checking all the ball joint and movement parts are moving freely.
2, Applying suitable grease on Shocks (P-15 and P-21) and ball differential (P-10).
3, Tire around the Rims (P-21) must be fixed with Superglue (Aron Alpha).
4, Adjust the down stop screw (P-15) to let the front lower arm in horizontal.
NO DOWN STOP IS
REQUIRED IN FIRST SET UP . Applying down stop may cause steering sensitive.
5, Adjust the central shocks to line up in flat the chassis front and rear.
6, Adjusting ride high around
3mm on front (P-20) and rear (P-11) before run.
7, Keep the length of Steering Rods (P-13) in between 13.4mm to 13.6mm. Shorter may cause
toe-out for stable in cornering. Longer may cause toe-in for steering sensitive.
8, For beginner: Motor 2500KV, Front Tire GLF001-25/GLF001-27, Rear Tire V9R10-F1-GL.
9, For competition: Motor 3500KV or above, Front Tire GLF001-23/GLF001-25, Rear Tire V1R10-F1-GL.
10, After the body shell installed to the chassis, check all the moving parts be freely before
run.
Recommended basic option parts available at GL online shop
GLF-OP-001 Side Shock Spring
GLF-OP-002 Front Shock Spring
GLF-OP-003 Side Screw Adjustable Shock
GLF-OP-004 Front Screw Adjustable Shock
GLF-OP-005 Steering Knuckles (1
°
)
GLF-OP-007 Central Long Piston Rod (Compatible with GLR)
GLR-003-CL Central Shock Spring (Compatible with GLR)
P-28