3
TESTING
-
(1) Turn the video recorder on and insert a tape.
(2) Position the CLONER with the infra-red emitter on the base pointing
......
to within 500mm (18") of the infra-red sensor on the video recorder.
(3) Press 'LEARN' on the CLONER for one second.
(4) Video recorder starts recording
(5) 'MONITOR' lights for 10 seconds
(6) Video recorder stops.
If the video does not operate, reposition the CLONER and re-test.
Repeat the learning procedure if this does not work.
When satisfied fit the small black patch (supplied) over the 'IR INPUT'
window to prevent code corruption.
IR EMITTER
IR SENSOR
VIDEO RECORDER SHOWING
TYPICAL POSITIONING OF
THE
TOP
Positioning:
Ensure the infra-red emitter
lines up with the infra red
sensor on the video recorder
using the secure fixing pad.
OUT
VIDEO
IN
VIDEO RECORDER
SELECT AV INPUT
T.V.
SELECT 'AV'
EXAMPLE 2
SCART
SCART
AERIAL
IN
AERIAL
CAMERA
VIDEO
OUT
OUT
VIDEO
IN
VIDEO RECORDER
SELECT AV INPUT
T.V.
SELECT VIDEO
CHANNEL
EXAMPLE 1
SCART
SCART
AERIAL
IN
AERIAL
CAMERA
VIDEO
OUT
GREEN
MONITOR
IR INPUT
LEARN
Video
recorder
Camera
TV
-20T +55C
S
A
12VDC at 14mA
CCTV
VIDEO
-
+
9 - 15VDC at 50mA (max)
BLUE
RED
Controlling a video recorder for single camera CCTV applications.
On detection the 'VIDEO' output closes, the
then sends an infra-red
'RECORD' signal to the video recorder. An infra-red 'STOP' signal is sent 5 to 60
seconds after detection ends. (See Mode 6 on Elite Iinstallation instructions)
On detection the 'A' output switches negative. The
then sends an
infra-red 'RECORD' signal to the video recorder. An infra-red 'STOP' signal is sent
30 seconds after detection ends.
S
A
Video
recorder
Camera
TV
MONITOR
IR INPUT
LEARN
GREEN
BLUE
RED
-
+
9- 15VDC at 30mA (max)
:
.
On detection the 'A' output of the
PIR switches negative.
The
sends an infra-red 'RECORD' signal to the video recorder.
30 seconds after detection ends an infra-red 'STOP' signal is sent.
4
Camera
Video
recorder
TV
AS
FAX
GREEN
RED
BLUE
+12VDC
9 - 15VDC at 50mA (max)
- +
