GJD GJD840R, Руководство по установке

Страница: 3 / 5

3 / 5 September 2013 Rev 4
10
11
Packaging
The package contains:
• 1x wireless detector
• 3x wall plug & screw sets
• 1x lens mask
• 1 x additional Fresnel lens (4m pattern)
• 1x tamper cup
• 2x tamper caps (different lengths)
• 1x plastic opening tool
• 1x installation manual
•
1x drilling template for fixing holes
GJD’s Ricochet
®
enabled D-TECT
®
The wireless detector uses a quad pyro where both sensors
must trigger to cause the detector to signal an alarm ensuring
precise and reliable presence detection.
Programmable options include a variable pulse count and a
choice of detection ranges up to 40 meters.
The dual-axis tilt sensor allows 180° of pan and 90° of tilt. This
increases the speed of the outdoor installation and provides
accurate aiming of the detection pattern.
Precision electronics, digital white light filtering, and double
shielding eliminates false alarms from the sun.
The detector housing has a professional appearance with the
sensing module hidden behind the front cover.
Quick installation
1. Place two CR123 batteries into the detector battery
holders. Observe the polarity. See figure 4, item 1. The
detection LED will flash four times.
2. With the Ricochet
®
expander in commission mode enter
the learning menu on the control panel. To learn the device
follow the instruction given in the control panel documentation.
3. Press and release the programming button once to learn
the device. ( Fig 10, item 2).This action also activates walk test
mode.
Note: The learn process may take up to 10 seconds
from pressing the programming button. Learn will be
confirmed on the control panel.
4. The detector will take approximately 3 minutes to settle.
The detection LED is now enabled for five minutes.
5. Mount the detector following the instructions below.