Gitzo ACCSS8032, Руководство пользователя

Страница: 9 / 20

FIG. 1 – Extending the tripod legs
Turn all the twist locks of each leg 1/4 clockwise of a turn at the same time,
then pull the leg down and tighten the twists individually.
FIG. 2 – Leg angle adjustment
Tripod ACCSS8032 is fitted with sliding stops which enable the legs to be
individually set at 3 different angles permitting different heights.
FIG. 3 – Reversible 3/8” or 1/4” fixing screw
FIG. 4 – Fix accessory on tripod
Mount the tripod head on the disc at the top of the center column (screw
tripod head clockwise). Tighten the grub screw against the base of the tripod
head, using the key supplied with the tripod. This feature prevents the tripod
head unscrewing accidentally.
FIG. 5 – Mounting the long column
FIG. 6 – Raising and lowering column
FIG. 7 – Spikes supplied with the tripod
FIG. 8 – Hook
Allows you to stretch a rope or shock cord between the tripod’s center hook
and a weight, switchable magnetic base, or existing anchor point.
FIG. 9 – Maintenance
The internal thread of the leg locks can be cleaned and greased to perform
optimally. Turn the twist lock until the thread is exposed, and remove any
dust or sand with a cloth. Apply a small amount of grease (sold separately:
GSGREASE02) onto the thread, and turn the twist lock until it is locked.
In addition to reading these instructions, it is also important to read the
general instructions printed on the warranty card packed with your product.