W
et Air Cutting Saw
GPW-227 Instruction Manual
GISON
6
1
3
8
4
2
D. Feed Compressed Air
1.
Check and verify if the fix screw (1) is tightly fastened.
2.
Connect air hose to air inlet (4)
PRECAUTION
Prior to cutting, trial run the tool with free load for few seconds to visually check if cutting
blade is fixed properly and the tool is running smoothly. Stop the tool immediately if any
abnormal sound or vibration is found. Re-check the installation of cutting blade or
consult with distributor for further assistance.
3.
Press trigger (2) to check if the tool start running; keep your hand away from the cutting
blade to prevent from injury.
4.
To run tool continuously, first hold trigger (2) and trigger lock (3), second release trigger;
then the tool can now work continuously; it eases finger off the long pressing fatigue.
5.
Press trigger (2) to release trigger lock (3) when you need to return normal operation.
