Gis GHF 1250, Перевод оригинального руководства пользователя

Страница: 10 / 20

10 Swiss Lifting Solutions
Figure 2-2 GKU 5000
Figure 2-1 GKU 1250/2500
Assembling the end carriages:
• 2 buffers are mounted on the end face of each end carriage.
• Only original GIS trolleys may be used as push trolleys (see Chapter 0.6).
• The GKU 1250/2500 series is mounted directly on the trolleys as shown in Figure 2-1.
• The GKU 5000 series is mounted with an additional suspension part as shown in Figure 2-2.
• One side of the single or double crane bridge must be designed as a fixed bearing (see Figure 2-3). The opposite side must be designed as
a floating bearing to compensate for crane track inaccuracies (see Figure 2-4).
• Assembly of the supplied adjusting rings is carried out according to the illustration on the technical data sheet.
The trolleys must be assembled in accordance with the original instruction manual for GHF/GMF trolleys.