Gis GCH1000 Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 22

Gis GCH1000 Series Скачать руководство пользователя страница 22

G I S C H A I N H O I S T S W I S S Q U A L I T Y

22

EC DECLARATION OF INCORPORATION

Declaration for the incorporation of partly completed machinery according to EU directives 2006/42/EC, Annex II B, 2004/108/EC, Annex I
and 2006/95/EC, Annex III

We,

GIS AG, Hebe- und Fördertechnik, Luzernerstrasse 50, CH-6247 Schötz

hereby declare that the following partly completed machinery

GIS electric chain hoist, series

GCH

payload range

100 kg - 5000 kg

developed for lifting and lowering loads, is, in standard production and from the 2005 model year, inclusive of
load control, intended for installation in machinery and meets the essential requirements of the following EC
directives, as applicable to the scope of the delivery:

EC Machinery Directive

2006/42/EC

EC Directive on Electromagnetic Compatibility

2004/108/EC

EC Low Voltage Directive

2006/95/EC

We also declare that the technical documentation has been compiled in accordance with Annex VII, Part B of
Directive 2006/42/EC. We undertake to submit the specific documents relating to the lifting mechanism to
national authorities on receipt of a reasonable request. The information will be supplied by electronic means.

Harmonized standards applied:

ISO 2374

Lifting appliances; Range of maximum capacities for basic models

DIN EN 818-7

Short link chain for lifting purposes; Part 7: Grade T

DIN EN ISO 13849-1 Safety-related parts of control systems; Part 1: General principles for design
DIN EN 14492-2

Cranes, power driven winches and hoists; Part 2: Power driven hoists

DIN EN 60204-32

Electrical equipment of machines; Part 32: Requirements for hoisting machines

Standards and technical specifications applied:

FEM 9.751

Power driven series hoist mechanisms; Safety

FEM 9.755

Measure for achieving safe working periods

This declaration only refers to the lifting mechanism. Commissioning is prohibited until it has been
firmly ascertained that the crane, in which the lifting mechanism is installed, complies with the
provisions of the above EC directives.

Authorized to compile relevant technical documentation:

Mr. Pius Engel, GIS AG, Luzernerstrasse 50, CH-6247 Schötz.

Schötz, 11.10.2010

GIS AG

I. Muri

E. Leiva

Director

Sales

Manager

Responsible for completion, installation and commissioning as per instructions:

Place: .............................................................. Date: ..............................................

Responsible: ...............................................................................................................

Company: ...................................................................................................................

«
...
20
21
22

Содержание GCH1000 Series























Отзывы:

Нет отзывов