Girmi Kasanova GIR000096NOC, Инструкция по эксплуатации

Страница: 11 / 36

10
of rest. Never leave the appliance unattended while it is
running.
Do not insert large pieces in the container, especially hard
food. It is advisable to pre-chop the food.
When mincing fruits, remove the pit and/or any tough
rind. Unplug the appliance from the electrical outlet
immediately after using and / or before touching any
accessory, especially the blades. If some food stops the
blades before removing it, unplug the unit from the
electrical outlet.
Do not insert food if it’s too hot (maximum 40 C).
Not exceed the maximum capacity for ingredients as
indicated in the Operating section.
At the end of processing, wait for the blade to completely
stop before removing the food from the container. When
finished using the unit, wrap the power cord so as to
ensure a better cleaning, avoiding any risk of damage.
For cleaning, we recommend using warm water only,
limiting the use of detergents. In this case, rinse the part
profusely. Do not immerse the motor unit in water or
other liquids; clean it with a damp cloth.
Caution: blades are very sharp; pay attention not to cut
yourself while removing the attachment or during
cleaning operations.
Bring knob on "0" (OFF) position before inserting the
plug in the socket.
DESCRIPTION TR05
1. Working and PULSE button 2. Container slot 3. Transparent container
4. Lid with safety block 5. Rostrum with blades 6. Main body
7. Antislip feet 8. Lid slot 9. Shaft
OPERATING THE UNIT
Assembling the unit by following the steps as shown besides.
1)
Fit the glass container properly into the main body by turning it into place until it snaps.
2) Insert the rostrum in the container without touching the blades.
3) Insert the food without exceeding the maximum capacity.
4) Fit the lid properly over the container, by turning counterclockwise until it clicks in
position. Plug the unit and push the operation button to turn it on.