GMM
-
Series Milling Machine
Welding & Cutting accessories
3.
Operation Instruction
3.1 Electric Voltage Detection
Danger
Check the Voltage whether the same with the nameplate!
3.2 Cutter Detection
Blunt cutter will damage and overload the machine!
Check the cutter regularly to avoid excessive wearing!
Make sure the cutter sharp!
Notice
Change the direction of cutter or replace indexable tool before blunt!
3.3 Bevel Height Adjustment
1) Rotate the check ring (2) Until the slide caliper(4) And the main scale (3)To the bevel height
you wanted.
2) Use the check ring locking at the position.
3) Use the crescent wrench tightening the guide board device (1), not too tight.
1. Guide Board Device
2. Check Ring
3. Main Scale
4. Slide Caliper
Note:
For not all milling cutter heads are the same length, so the data on the main scale not
exactly accurate, and usually adjust the bevel height accurate to the millimeter!!!
3.4 Instruction
Fix the machine and use it in a flat ground before using.
Do not touch the milling cutter head while it is working.
Keep a certain distance form the machine.
Not allowed to use the machine lifting over the head.
Notice
Do not touch the work pieces while the milling cutter head rotating.
5
