GIRBAU FL Series, Техническое руководство

Страница: 15 / 85

13 FL0610A
1.5 TECHNICAL FEATURES
The technical features of the FL SERIES vary depending on the options ordered.
Several folds can be made, depending on the model:
1, 2, or 3 primary folds in 1, 2 or 4 lanes using an air jet (the item comes out with
the corners inside),
1, 2, or 3 primary folds in 1 to 2 lanes using mechanical blade (the item comes out with
the corners inside).
The items are measured on the folding machine feeder conveyor:
- A roller in contact with the linen turns and drives an optical pulse generator (OPG),
- A cell triggers the start and end of impulse counting.
This makes this measurement regardless of the speed of the ironer, allowing very accurate
folding
TECHNICAL FL-SMART
FEATURES FL-KING
ELECTRICAL
Power installed 3 to 4,5 KVA
Power cable section 3x2.5 ²
Basic voltage and frequency 380-400 Volts/50 Hertz
COMPRESSED AIR
Maximum supply pressure 10 bars
Power cable section Ø 15 x 21
Maximum supply pressure
6 bars with temporary pressure drop
de 0,5 bars maximum
Power consumption
for 100 items
5 Nm ³ /100p
835l/100p at 6 bars
Air pressure safety switch Set to 4.8 bars
OTHERS
Noise level 76 dbA
Height 1840 + 80 lifting rings
Mass 1 800 to 2 300 kg
Weight/Foot (Pressure on the ground) 57 to 73 N/cm ² / 4 feed
Useful Width (Lu)
Lu = 3000 4010 mm
Lu = 3300 4010 mm
Lu = 3500 4010 mm
Operating temperature
5 ° C to 40 ° C
Humidity
95% at 25
°
C without condensation
Conveyor speed
Primary 10 to 50m/min
Cross 65m/min
Options:
- Feeder with by-pass 1V2V
- Antistatic double bar
- Front end remote control
- Small linen receiver
- Dirty/Torn selection using flap or bell and warning light