Pushbutton sensor 4 Standard / Komfort System 55
7.2 Commissioning
Programming the physical address and application program
Project design and commissioning with ETS from version 5.7.5 and above.
The programming button is located under the first rocker.
Precondition: The device is connected and ready for operation.
The first rocker is dismantled.
￭
Activating Programming mode: push the programming button.
The programming LED lights up red. Programming mode is activated.
￭
Programming the physical address.
The programming LED goes out. Physical address is programmed.
￭
Programming the application program.
The device is for use.
All status LEDs are switched off while the application program is programmed. As soon as
the programming is successfully completed, the status LEDs carry out their parameterised
function.
Only for "comfort" device variant: When the application program is discharged and the
bus voltage is connected, all status LEDs initially light up white. Whenever a button is ac-
tuated, the respective illuminated status LED changes colour in (white → red → green →
blue → yellow → cyan → orange → violet → white → ...).
Only for "standard" device variant: When the application program is discharged and the
bus voltage is connected, all status LEDs initially light up green. Whenever a button is ac-
tuated, the respective illuminated status LED changes colour (green → red → blue → green
→ ...).
10 / 16
32406202
10868646
29.06.2022
