o
Press any button for approx. 1 second.
5.2 Commissioning
Setting functions
Wall transmitter is unscrewed from the base plate / the wall.
Figure 9: Function switch
i
In the state as delivered all function switches are set to the
ON
position.
o
Select functions of the buttons with the function switches according to the following table .
Function switch
Button
ON
OFF
1
Button 1-
Button 1+
Channel 1-
Channel 1+
All off
Light scene 1
2
Button 2-
Button 2+
Channel 2-
Channel 2+
Light scene 2
Light scene 3
3
Button 3-
Button 3+
Channel 3-
Channel 3+
Light scene 4
Light scene 5
Teaching transmitter in radio receiver
In order for a receiver to understand a radio telegram from the transmitter, the receiver has to
"learn" this radio telegram. A channel of the transmitter can be taught in any number of
receivers. The teaching procedure only results in an assignment in the receiver.
When teaching a transmitter, the range of the receiver is reduced to about 5 m. The distance
between the receiver and the transmitter being taught should therefore be between 0.5 m and
5 m.
The function switch for the channel being taught is set to
ON
.
o
Switch radio receiver to programming mode (see instructions for receiver).
o
Press the "+" or "-" button of the desired channel longer than 1 second.
o
Exit programming mode of the receiver (see instructions for the receiver).
The channel of the transmitter has now been taught in the radio receiver.
Teaching a light scene button
The function switch for button being taught is set to
OFF
.
o
Switch receiver to programming mode (see instructions for receiver).
o
Press the light scene button for longer than 3 seconds.
o
Exit programming mode of the receiver (see instructions for the receiver).
Light scene button has been taught.
Deleting All Off
If a certain receiver should not respond to the All Off button, then this function has to be
deleted.
o
Switch receiver to programming mode (see instructions for receiver).
32532712
10499114 I00
28.09.2011
7/9
Radio bus system
Radio wall transmitter, flat design
