GIRA
Info
Hand-held radio transmitter
Installation Instructions
Hand-held radio transmitter
15/01
Page: 8 of 10
A
B
C
1
2
3
4
5
1
2
3
4
5
6
7
8
<
>
>
<
Changing the lightscape with the master key
By means of the the master key , the
activated
radio dimmers (dimmer
1
+dimmer
2
) can now be
dimmed, switched off or switched back to their
starting brightness.
Dimmer
3
is off and can therefore not be con-
trolled with the master key.
Louvers and switching actuators cannot be con-
trolled with this function.
The following functions are available:
Master key
light
short press left side, /\
start. brightness
long press left side, /\
brighter
short press right side, \/
switch off
long press right side, \/
darker
Special function radio detector/radio switching
amplifier
Procedure
1. Switch the radio switching amplifier into the
programming mode (see operating instructions
"Radio switching amplifier").
2. Select group A, B or C by depressing the
corresponding key. Then depress the
/\
or
\/
key of the desired channel (e.g. group C,
channel 7) for at least 1 second. The radio
switching amplifier confirms storing by
switching of the load.
3. Switch the radio switching amplifier into the
operating mode (see operating instructions
"Radio switching amplifier").
Channel programming of the key is terminated.
Depress the corresponding channel key
/\
for at
least 1 second to switch on the switching
amplifier.
Depress the channel key
\/
for at least 1 second to
switch off. The radio switching amplifier switches
back automatically into the operating mode after
about 2 hours (see operating instructions "Radio
switching amplifier").
