manualshive.com logo in svg

Giorik STEAM BOX SBPE061, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Giorik STEAM BOX SBPE061 Скачать руководство пользователя страница 29

29

steam-boX. installation, use and maintenance manual

5. What to do if

5.1.  Common problems 

In case of a serious anomaly it is very important to switch-off the equipment, by acting 
on the multiple pole switch, and close the gas and water shut-off cocks upstream of 
the appliance. 

Problem

Possible solution

the oven does not start

Check that the multiple pole switch is closed and there is mains voltage.

Check that the gas shut-off cock upstream of the appliance is open.

Check integrity of the oven protection fuses.

ensure the oven door is correctly closed.

Check to have correctly set the cooking cycle parameters.

ascertain the oven is not in error.

if after these operations the oven does not start, contact the after-sales assistance.

the fan stops during functioning

switch-off the oven and wait for the motor thermal protection to 
automatically reset.

ensure that the cooling inlets are not obstructed.

should the problem repeat, contact the after-sales assistance.

internal lighting
does not work

Use lamps resistant to heat.

Replace the lamps as follows:

  ascertain that the omnipolar switch upstream of the oven is open and 

the appliance is cold.

  open the internal glass of the oven door.
  Remove the protection glasses of the lamps.
  Replace the lighting lamps.

should the problem repeat, contact the after-sales assistance.

Water does not flow into the 
humidifier tubes

Check that the water shut-off cock is open.

should the problem repeat, contact the after-sales assistance.

the oven is in "Gas" error

Check that the gas shut-off cock upstream of the appliance is open.

Restore the flame block (see paragraph 4.5).

Have a technician check the electric connection sequence is correct and 
that a potential difference of 230 v is present between phase and    .

should the oven continue not to work, due to the burners not igniting, contact the after-sales assistance.

Содержание STEAM BOX SBPE061













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды