5
on.
Volume
Up/Down
(Right
side)
When a call is in progress, Increases or decrease the
call volume, When the phone is ringing, silences the
ringer. On the Home screen when no calls in progress,
Increase or decreases the ringtone volume, or sets the
phone to be silent instead of ringing. In other
applications, controls the volume of music, spoken
directions, and other audio.
Quickly increasing
the ringtone
volume to
maximum or
minimum.
3. Before using
Insert SIM card
The phone is a Dual SIM mobile phone allowing you to use the facility of two networks. To
insert SIM card(s):
1. Switch off the mobile phone and remove the rear cover and battery.
2. Insert the SIM card correctly in the card slot(s)
3. Finally insert the battery and replace the rear cover of the mobile phone.
Note:
The SIM card is a small object; please keep the card out of the reach of children to
avoid swallowing the card by accident. Do not touch the metal surface of the SIM card and
keep it away from electromagnetism to avoid loss and damage of the data. You will not be
able to connect to the network if the SIM card is damaged.
Insert Memory card
Use only compatible memory cards approved by our company for use with this device.
Incompatible memory cards may damage the card or the device and corrupt the data
stored in the card.
To insert the memory card:
1. Power off the mobile phone. Then remove the rear cover.
2. Insert the memory card into the slot.
3. Finally replace the rear cover of the mobile phone.
Remove/Insert Battery
You may need to remove the battery to insert SIM cards or for replacing the battery.
To insert the battery:
1. Invert the back of the mobile phone upward and then take off the rear cover.
2. Insert the battery.
3. Finally place back the rear cover of the mobile phone.
Note:
Please use the original-packing battery and accessories.
Charger
1. Connect the charger to the charger jack on the phone.
2. Next connect the charger to a power socket, the charging starts, with the charging icon
Содержание G3
Страница 1: ...1 GIONEE G3 User Guide ...
