HOW TO OPERATE
6
Ginnys.com 800-544-1590
1. Lift the can opener lever to the upright position.
2. Place the can so the lower edge of the can “lip”
rests on top of the drive wheel. Lower the lever so
the cutting blade is on the inside of the lid.
3. Push the lever down firmly and hold until the can
lid is pierced and the cutting action begins (the can
will turn). It is not necessary to hold the lever down
(it will stay down and hold the can).
4. When the lid is cut off, the can will stop turning.
The can will remain in position. To release, grasp
the can firmly in one hand and raise the lever using
the other hand. The lid magnet will hold the lid.
LID EDGES WILL BE SHARP!
• Occasionally, dented cans will cause the can opener to stall. If this
happens, grasp the can and carefully guide it through the cutting
action.
• To open a can that has become jammed, raise the lever and release
the can. Begin the cutting action again in a new place on the can lid.
OPEN A CAN
Tips:
