Ginetta G55 GT4, Руководство пользователя

Страница: 20 / 40

20
Setting Platform Heights
You must begin by setting the platform height on each of the 4 dampers to an equal level so the car has a ride height
just above the limit. Once completed, use corner weights to adjust the rear two platform heights accordingly to
make the car balanced, ensuring the car remains on or above the required ride height.
Tyre Pressures
Before running the car the tyre pressures should be set. The rear tyres should be set to lower pressures as they are
the driven wheels and consequently will get hotter than the fronts during use.
For right hand (RH) circuits the tyres on the left hand side (LHS) will get hotter, therefore they should start with
slightly lower pressures, and vice versa for left hand (LH) circuits.
*All pressures are in PSI and are weather dependant as ambient conditions affect cold pressures.
Target hot pressures: 28 psi all round.
21
22
20
19
RH Circuits
22
21
19 20
LH Circuits
Figure 4.3
Platform height
adjustment