7
Technical features
- NEW «GIN LOW FRICTION RING»:
The new kite bridle standard devloped by
GIN KITBOARDING.
No pulleys to break, no sand wear out.
- Single point inflation system:
External system / Clip protection / No dump valves for safe and easy use.
You do have the choice of sealing off the connections between struts and LE. This helps in
case of a puncture or to store the kite with struts inflated. The flight of your kite will be also
optimised. In order to re-balance the pressure in the whole kite, open all the connections
before inflating the LE.
Whenever you replace a bladder, throw away the 3 white plastic zip ties (from the valve of
the bladder to replace). These ties help to achieve an airtight connection between the valve
and the tube (visible on pict 2). Change the bladder and use 3 new plastic zip ties. Cover the
valves with the neoprene covers (pict 1).
- Handle on the leading edge:
The main leading edge tube is equipped with a
double use handle
It enables you to attach the strap of the pump to it,
in order to inflate the kite safely, without holding
the kite.
You will benefit from an easy and safe handhold to
carry your kite up-wind, inner surface facing up,
top surface down.
1
2
