10
Safety system
It is imperative that you know the correct operation and assembly of your safety system be-
fore using it. Always check your safety system before each use to make sure that it functions
correctly. Keep the quick release clean of sand, mud, ice or snow before use.
Main quickrelease
1. To release: push the top part of the main quickrelease away from you, in the direction of
the red arrow printed on it. You will be connected to the kite by the kite leash connected to
the safety line of the kite (one front line).
2. To lock: push up the top part of the quickrelease, introduce the metallic loop of the chic-
ken-loop into the main quickrelease piece.
3. Lock the system by covering the metallic pin with the top part of the main quickrelease.
Kite leash
1. To release: push the red tube away from
you, in the direction of the black arrow.
You will not be connected to the kite any
more.
2. To lock: pass one side of the metalic pin
through the loop of the released part. Place
this same side of metallic pin parallel to the
black plastic tube and cover it with the red
tube. The system is locked when the red
tube is touching the black plastic ball.
1
2
3
