Gin Gliders Gingo Airlite L, Руководство пользователя

Страница: 18 / 36

18
WARNING: If you are in any doubt about
any aspect of rescue installation, seek
professional advice!
IMPORTANT: You must perform a test
deployment from a simulator to verify the
installation.
Rescue Installation and compatibility check
Gin Gliders recommend that rescue installation is performed properly by a competent person.
The rescue parachute is a pilots last resort and failure to pack or connect the reserve parachute
in the correct way may cause death or severe injury. The pilot is responsible for ensuring proper
installation.
The Gingo Airlite is compatible with One G and Yeti rescue parachutes (#27,35,40). Other
manufacturers’ rescues may also be used but we cannot guarantee their function. The pilot is
responsible for checking compatibility.
Every first installation of a rescue system into the harness (that means every new combination
of harness and rescue system) must be checked by a qualified paragliding professional for
compatibility. To verify the installation, you must perform a test deployment by sitting in a
simulator.
Rescue parachutes should be repacked at least every 150 days; so installing your rescue in a
new harness may also provide a good opportunity for a repack. After every repack of the rescue
parachute you should also do a compatibility check. Make sure that the rescue parachute can
be released from the rescue container—it must be done by you, the pilot, sitting in the harness
hanging from a simulator.