Gimenez Ganga PS-25 R, Инструкция по сборке

Страница: 6 / 8

6
STEP 3
Support the slats and tool on the cutting machine pro-
file to align the slats. Introduce a second tool to align
them correctly and apply shrink film in the cutting are-
as and intermediate areas to prevent the profiles from
getting damaged during cutting.
STEP
4
Make sure that the cutting mark of the slats is aligned
with the cutting disc before proceeding with the first cut.
Once the first cut has been made,
do not move the slats
and mark the position of the tool on the cutting ma-
chine
, by doing this, whenever we use the tool in the 4th
and 5th perforations on the slats, we can make sure we
get the same slat cutting measurement to produce
the same curtain . For other curtain sizes carry out the
same process.
REPEAT THE PROCESS
FOR THE FOLLOWING
MACHINED SLATS.
IMPORTANT
Once the first and second cuts have been made, check that the curtain is symmetrical before continuing
with the fabrication.