Gimeg MANOR HOUSE Paul, Руководство по сборке, Страница: 3 / 7

3
Installation
Bio-ethanol fireplaces can be installed almost anywhere – in the living room, of course, but also in a
bedroom (live-in) kitchen, in a chalet or mobile home. Before installing the fireplace find out the na-
tional and local regulations.
The fireplace was designed as a suspension installation. Place the fireplace in a minimum space of 32
cubic meters (Width x Length x Height of the room). Be sure that the space in which the fireplace is
placed has sufficient ventilation for the fireplace, which can be distributed across several ventilation
openings.
One benefit of bio-ethanol fireplaces is that they are easy to install and relocate. If you change your
interior arrangement, you can easily position the fireplace in another location. The investment in a
bio-ethanol fireplace is also low, certainly compared to traditional fireplaces and fires. Besides adding
atmosphere, the bio-ethanol fireplace provides a pleasant source of supplemental heating. However,
the fireplace was not designed as a primary source of heat. Use the bio-ethanol fireplace no longer
than 8 consecutive hours. The bio-ethanol fireplace is not designed for continuous use.
Assembly
Please read the instructions carefully before installation or use of the bio-ethanol fire and retained for
future reference.
• It’s recommended at least 2 or more people install the fireplace.
• Before installation, remove the packaging and check to see whether the fireplace is damage free.
If this is not the case, you should contact the purchasing address.
• Do not remove the non-flammable panel from the back of the fireplace.
• Only install the fireplace on a vertical, solid, stable and non-flammable rear wall.
• Determine the location in the space where the fireplace should be suspended.
• Only install the fireplace in a minimum space of 32 cubic metres.
• The fire must be hang solid and stable. Before installing the fire, the supplied assembly set has to
be used. The kit consist of: 1 bracket, a glass plate and a bag with the necessary screws and plugs.
Place the bracket according te the installation instructions. It should be on the wall, fully mounted
hoizontally, use the supplied level.
• Drill the two remaining screws on the wall, please follow the installation drawing.
• Hang the bio-ethanol fireplace with at leasr two people to the bracket and make sure that the
lower screws clinging the fireplace to the wall.
• Place the reservoir in the fireplace with the filling hole at the back.
• Screw the glass plate by means of the screws on the hearth.
• As a result of heat formation around the fireplace, the background could start to discolour slightly
over time.
• Keep inflammable material at least 50-cm away from the fireplace. Do not place any flammable
materials in or on the reservoir.
• Make sure that the fireplace is mounted properly.
ENG
Security video
Scan this QR Code with your mobile phone for a comprehensive safety instruc-
tion on the proper use of a bio-ethanol fireplace.
Gimeg Nederland B.V. Strijkviertel 27 3454 PH De Meern