Gima CARDIO-B, Инструкция по эксплуатации и обслуживанию

Страница: 36 / 56

36 ENGLISH
3.2.2 Measuring Procedure
1. Press “ Measure” to enter into ECG measuring screen, as shown in Figure 3-4.
The first 6 seconds is preparing phase, during this period the unit will judge whether the
placed position is befitting. Please adjust your holding position if the detected waveform is
not smooth.
Figure 3-4 Measuring Screen
1. “16: 14: 32”: current time.
2. “X1”: ECG waveform amplitude scale. “X1/2”: half size of the nominal scale; “X1”: nominal
scale; “X2”: twice the size of the nominal scale; “X3”: three times the size of the nominal
scale.
3. “ ”: heart beat indicator. It flashes while heart beats.
4. “ ”: indicates that ECG filter mode is “Enhanced”; Refer to section 3.5.6 for filter
setting.
5. “ ”: Status of battery power
6. “ ”: ECG waveform
7. “ ”: Ruler for 1mV amplitud
8. “ ”: Status bar of measurement progress.
When finishing measurement, it enters into the result display phase, as shown in Figure 3-5.