83
Do NOT press or scrape the bleeding finger.
The testing strip should be used as soon as possible after unpacking, and the unused strips
should be kept in the bottle with airproof condition.
Take measurement only once within 1 min.
☞
If the monitor is connected with both temperature probe and the blood glucose meter, the
screen will show
.
The blood-collect pinhead is a disposable item. It’s recommended to insert it back to the
plastic cover and throw it into the specific dustbin.
2.3.5 ECG Measurement (Optional)
1. Connect the Easy ECG Monitor to the connector on the upper side of device marked "ECG"
("PORT1" or "PORT2" for previous version of the device).
2. Choose one of the methods (refer to figure 2.10B/C/D/E) to take the ECG measurement.
3. When the Easy ECG Monitor and Spot-Check Monitor are successful connected, press the
"Start" button on the Easy ECG Monitor to activate the ECG measurement.
4. When "ECG" appears on the display screen of the Spot-Check Monitor, it means the Easy
ECG Monitor has begun to take the ECG measurement.
5. 30 seconds later, the result will display on the screen of the terminal device, and the measu-
rement will terminate.
ENGLISH
