20
Instructions to User
Read these instructions carefully before using this equipment. These
instructions describe the operating procedures to be followed strictly.
Failure to follow these instructions can cause measuring abnormality,
equipment damage and personal injury. The manufacturer is NOT re-
sponsible for the safety, reliability and performance issues and any mon-
itoring abnormality, personal injury and equipment damage due to user’s
negligence of the operation instructions. The manufacturer’s warranty
service does not cover such faults.
- The contents contained in this manual are subject to change without
notice.
- The uncomfortable or painful feeling may appear if using the device
ceaselessly, especially for the microcirculation barrier patients. It is
recommended that the sensor should not be applied to the same
finger for over 2 hours- If any abnormal condition is found, please
change the position of Pulse Oximeter.
- For the individual patients, there should be a more prudent inspecting
in the placing process. The device can not be clipped on the edema
and tender tissue.
- The light (the infrared is invisible) emitted from the device is harmful to
the eyes, so the user and the maintenance man, can not stare at the
light.- The Pulse Oximeter is not a treatment device.
- Testee can not use enamel or other makeup on the finge.
- Testee’s fingernail can not be too long- Please peruse the relative con-
tent about the clinical restrictions and caution.
1. SAFETY
1.1 Instructions for Safe Operations
- Check the main unit and all accessories periodically to make sure
that there is no visible damage that may affectpatient’s safety and
monitoring performance with regard to sensors and clips. It is recom-
mended that the device should be inspected minimally before each
use. When there is obvious damage, stop using the oximeter.
- Necessary maintenance must be performed by qualifid service tech-
nicians ONLY. Users are not permitted to maintain it by themselves.
ENGLISH
