28
temperature, allow the thermometer to remain in a room for 30 minutes where the
temperature is between 15℃ to 40℃.
EMC Declaration
1. This equipment needs to be installed and put into service in accordance with the
information provided in the ACCOMPANYING DOCUMENTS;
This product needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided, and this unit can
be affected by portable and mobile RF communications equipment.
2. * Caution: Do not use a mobile phone or other devices that emit electromagnetic
fields, near the unit. This may result in incorrect operation of the unit.
3. * Caution: This unit has been thoroughly tested and inspected to assure proper
performance and operation!
4. * Caution: this machine should not be used adjacent to or stacked with other equip-
ment and that if adjacent or stacked use is necessary, this machine should be
observed to verify normal operation in the configuration in which it will be used.
Guidance and manufacturer’s declaration – electromagnetic emission
The Non Contact Infrared Body Thermometer is intended for use in the electromagnetic
environment specified below. The customer of the user of the Non Contact Infrared Body
Thermometer should assure that it is used in such an environment.
Emission test
Compliance Electromagnetic environment – guidance
RF emissions CISPR 11
Group 1
The Non Contact Infrared Body Thermome-
ter use RF energy only for its internal func-
tion. Therefore, its RF emissions are very
low and are not likely to cause any interfer-
ence in nearby electronic equipment.
RF emission CISPR 11
Class B
The Non Contact Infrared Body Thermome-
ter is suitable for use in all establishments,
other than domestic and those directly con-
nected to the public low-voltage power sup-
ply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not
applicable
Voltage fluctuations/ flicker
emissions IEC 61000-3-3
Not
applicable
ENGLISH
