G
E
T
TI
NG
S
TA
R
T
E
D
6
GETTING STARTED
|
TRACKMAN® CONNECTED
The environment sensor user manual is available
here.
Start Pipetting
Microplate holder
A microplate holder is provided to position your 96- or 384-well microplates on the
tablet.
When prompted by PipettePilot, remove the two white strips from the microplate
holder and then place it on the corresponding frame on the tablet. Follow the
application instructions.
Microplate adapter
A microplate adapter is provided for semi-skirted or non-skirted plates.
Place your microplate in the adapter.
Place the adapter in the microplate holder (refer to Figure 4).
Place the microplate holder on tablet when prompted by PipettePilot.
NOTE
Figure 3
Environment sensor
Figure 4
Microplate holder
1
2
Figure 5
Microplate adapter
3
To turn off the environment sensor, press and hold the purple side down for five
seconds. The LED will blink rapidly to indicate it is turned off.
NOTICE
Pressing the button with excessive force may damage the device.
