Gilson Company, Inc.
Vibro-Deairator: SGA-5R & SGA-5RT
Page 2
SAFETY INSTRUCTIONS
Whether you are the owner, employer, operator, or maintenance person for this machine, safety is your responsibil-
ity. You are responsible for operating and maintaining this equipment in compliance with these instructions and for
using common sense. Review and completely understand the operating and safety instructions before using this
machine.
WARNING!
This machine operates on electric current. Improper operation could result in electric shock, electrocution,
or an explosion!
1.
ALWAYS
make sure the motor and other electrical components are appropriate and properly configured for
your intended use and available power source. The Vibro-Deairator is operated by a motor and controls wired
for 115V/60Hz. Motors are
NOT
explosion-proof.
2.
This device is
NOT
designed or intended for use in moist or wet environments. Electrical shock or damage to
the unit may occur if the unit is exposed to excessive moisture.
3.
ALWAYS
check electrical wiring for loose connections and for pinched or frayed wiring.
4.
ALWAYS
use a properly-wired, three-pronged plug, or otherwise ground the machine. Connect the machine to
a properly-wired, three-pronged receptacle. Make sure the cord is located where no one will trip or get tangled
in it.
5.
ALWAYS
disconnect and lock out power supply before performing maintenance and repairs.
WARNING!
WARNING:
DO NOT
operate the machine without having all covers and case in place.
WARNING:
ALWAYS
level the machine prior to operation.
WARNING:
Stop the machine immediately and re-level if excessive vibration or machine movement occurs.
WARNING:
ALWAYS
unplug or disconnect machine from the power source when the unit is not in operation.
WARNING:
Keep all parts of your body away from moving parts of the machine while it is operating.
WARNING:
DO NOT
wear loose clothing which might be caught in moving parts of the machine.
WARNING:
ALWAYS
wear safety glasses when operating, maintaining, or repairing this machine.
